Wynns Red Gasket Maker flexible high-temperature resistant 200ML SEAL pressure

Description

Store Home
New Arrival
Ending Soon
Add to Favorites
Feedback
Contact Us
Copyright ©
parts4youpl
. All rights reserved.
Description
Red Gasket Maker
Wynn’s Red Gasket Maker is a flexible high-temperature resistant, watertight filling and bonding material. It is a polysiloxane based product in a pressure cartridge for making seals and gaskets in a rapid and easy way.
Is resistant to oils, transmission fluids, water, antifreeze, grease, smoke and hot toxic gases.
Replaces cork, felt, paper and rubber gaskets.
Withstands low temperatures up to -40°C (continuous) and high temperatures up to 232°C (continuous) and 260°C (intermittent).
Does not harm catalytic converters and electronic sensors.
Retorquing is not necessary after complete curing.
No mixing required (single component).
Applications
Ideal for replacing seals and gaskets of engine components (cylinder-head cover, transmission and oil crankcase, water pumps, thermostats), light fittings, heating installations, AC, bodywork, industrial ovens, cooking stoves, window seals and many other applications.
The product is not suitable for replacing head gaskets nor for applications that require continuous immersion in petrol.
Do not use in joints deeper than 10 mm.
Avoid contact with solvent cleaners during cure.
Directions
Remove plastic tear- off lid.
Remove cap from nozzle.
Ensure that surfaces are clean, dry and grease free.
Turn the top clockwise until you hear a click. Now turn further clockwise till stop to open trigger completely. Turn to Max for a thicker bead and to Min for a thinner bead.
Apply the Gasket Maker by lightly pressing the trigger and drawing the bead along (6).
Immediately assemble parts.
Hand tighten until product begins to squeeze out around the flange.
Allow to cure for one hour, then retighten 1⁄4 to 1⁄2 turn.
Gasket will skin over in one hour and fully cure in 24 hours.
After use, wipe the nozzle clean and put back the cap.
If product has cured in the nozzle, loosen nozzle and remove cured product.
If the application is one in which the components are to be dismantled after the
gasket has been made, apply the Gasket Maker normally, but spread a light coating of oil to the opposing face of the joint before bringing the two surfaces together.
About us
Payment
Shipping
Returns
Feedback
Contact Us
Coming Soon...
-We accept returns on all unused items in their original packaging within 30 days of purchase.
-A refund will be made excluding all shipping costs.
-You have 20 days to inform us that you are returning the item, provided the part has not been fitted and is still in its  original packaging. After informing us of the return, you have time delivered items back to us to 30 days from delivery  date.
- We will then check the returned goods and make sure they are in resalable condition. If the packaging is damaged or the  seal has been opened or tampered with on the original packaging, we have the right to refuse the returned part.
- We will only grant a full refund on the original value of the goods excluding any packaging and postage costs.No refunds  will be issued without proof of purchase, name and address of recipient and a brief description of the problem with the  part when necessary. This will help us resolve any issues with your transaction as soon as possible.
- The buyer is responsible for the return shipping costs to send the item back to us, this applies to faulty and non-faulty  parts, once goods are returned they will be sent to the manufacturers to be tested.
Product Exchanges:
If you wish to return a product for an exchange, we reserve the right to deduct our initial shipping and handling fees. Any  exchange will have to be agreed upon by first informing us of the issue with the part. Then at our discretion we will  decide the next course of action.You have 20 days to request an exchange with explanation, and then 30 days from delivery  date to return the part back to us.
Faulty Products:
Any product returned as faulty, will be sent to the manufacturers to be tested. This process can take 2 to 4 weeks, if  needed customers will have to purchase a replacement part for the full value. Once the manufacturer has provided an  official report, declaring the part to be faulty only then will we refund you for your initial purchase. Manufacturer's  warranties differ from product to product, please don't hesitate to message or call us with any questions or concerns.
Important Information: If you choose to have any product professionally installed and it becomes faulty, We will NOT be  held responsible for any fitment/labour costs or any damage whatever sort including any recovery charges or transportation  costs involving in installing or removing the product from your vehicle during or after the warranty period.
International Buyers Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's  responsibility. Please check with your country's customs office to determine what these additional costs will be prior to  bidding or buying.
Feedback
About us
Coming Soon...
Payment
Shipping
Returns
-We accept returns on all unused items in their original packaging within 30 days of purchase.
-A refund will be made excluding all shipping costs.
-You have 20 days to inform us that you are returning the item, provided the part has not been fitted and is still in its  original packaging. After informing us of the return, you have time delivered items back to us to 30 days from delivery  date.
- We will then check the returned goods and make sure they are in resalable condition. If the packaging is damaged or the  seal has been opened or tampered with on the original packaging, we have the right to refuse the returned part.
- We will only grant a full refund on the original value of the goods excluding any packaging and postage costs.No refunds  will be issued without proof of purchase, name and address of recipient and a brief description of the problem with the  part when necessary. This will help us resolve any issues with your transaction as soon as possible.
- The buyer is responsible for the return shipping costs to send the item back to us, this applies to faulty and non-faulty  parts, once goods are returned they will be sent to the manufacturers to be tested.
Product Exchanges:
If you wish to return a product for an exchange, we reserve the right to deduct our initial shipping and handling fees. Any  exchange will have to be agreed upon by first informing us of the issue with the part. Then at our discretion we will  decide the next course of action.You have 20 days to request an exchange with explanation, and then 30 days from delivery  date to return the part back to us.
Faulty Products:
Any product returned as faulty, will be sent to the manufacturers to be tested. This process can take 2 to 4 weeks, if  needed customers will have to purchase a replacement part for the full value. Once the manufacturer has provided an  official report, declaring the part to be faulty only then will we refund you for your initial purchase. Manufacturer's  warranties differ from product to product, please don't hesitate to message or call us with any questions or concerns.
Important Information: If you choose to have any product professionally installed and it becomes faulty, We will NOT be  held responsible for any fitment/labour costs or any damage whatever sort including any recovery charges or transportation  costs involving in installing or removing the product from your vehicle during or after the warranty period.
International Buyers Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's  responsibility. Please check with your country's customs office to determine what these additional costs will be prior to  bidding or buying.
Feedback
Contact Us