Universal Wireless RF Remote Control AC 110V 220V 230V 30A Remote Controller

Description

Product Application Area
Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on.
Remote control Water pump \ Water Heater \ Fan \ Lamp \ LED light \ Bulb \ Ventilation device \ Signal transmission
DIY Remote control
Interruptor Receiver Board Parameter
Working voltage  :  AC 85V~250V
Quiescent Current  :  <5MA
Max current  :  30A
Max load:   6000W
RF frequency  :  433MHz
Pin  : L/N
Working temperature  :  -30~+80
Receiving Sensitivity  :  >97dbm
Amount of storage remote controls  :  20 pieces
Support encoding  :  1527 Leaning code /2262 fixed code
RF Operating mode  :  ASK superheterodyne wireless reception
Receiving range  :  Open space is more than 50 meters
Remote operating mode   : Momentary Mode / Toggle Mode / Latched Mode
Usage:
Latched mode:
1. Press button “ON”, Receiver will turn on;
2. Press button “OFF”,
Receiver
will turn off.
Reset
Press the learning button (on the Receiver) 8 times. reset succeed.
Note:
After deleted the data, all the remote controls cannot work any more.
Set up(Latched)
1. Press the learning button(on the Receiver)
triple
. Wait for 3 seconds;
2. Press button “ON” on the remote control. Wait for 3 seconds.
3. Press button “OFF” on the remote control. Wait for 3 seconds.
Succeed.
Note:
1.Reset before you want to change the operating mode of one remote control.
2.Stretch the antenna a bit for better signal transmission
Package include
Interruptor
Receiver Board (with shell)
Remote Control (with battery)
Product Manual
Video on Youtube :  https://youtu.be/otLI5GdGvvc