StewMac Slotted Fingerboard for Gibson, Ebony

Description

Our kiln-dried fingerboards have flat undersides, are unfretted (no inlays), and ready for trimming to fit a variety of neck widths
Slotted for the Gibson guitar scale commonly referred to as 24-3/4" (but is actually 24.562")
Features 24.562" scale, 12" radius, and 24 fret slots
Approximate dimensions: 2-3/8" x 18-1/2" x 15/64" (60.32mm x 469.90mm x 5.95mm)
Our kiln-dried ebony fingerboard has flat undersides, is unfretted (no inlays), and is ready for trimming to fit a variety of neck widths.
This slotted fingerboard for Gibson Guitar features:
24.562" scale
12" radius
24 fret slots
Note:
Gibson® guitar scale is commonly referred to as 24-3/4" but is actually 24.562".
This is the most common of three different scales described as 24-3/4" by Gibson over the years.
Many Gibson's have alternate scale lengths—please measure your guitar before ordering!
Tip:
For 20-fret necks, simply cut off the four highest slots.
Fingerboard specs:
Approximate dimensions:
2-3/8" x 18-1/2" x 15/64" (60.32mm x 469.90mm x 5.95mm)
Radius:
12" (304.80mm)
Fret slots:
24 slots, 0.023" wide (0.58mm)
Scale:
24.562" (623.87mm)
IMPORTANT:
Ebony is usually not uniformly black.
We recommend using black fingerboard stain, as used by Gibson®, Paul Reed Smith® and other makers for darkening the streaks on ebony fingerboards, bridges and peghead overlays.