Single Card Holder Acrylic Display Case (w/ your custom engraved saying) 180pt

Description

*** Single Card Holder Acrylic Display Case (w/ your custom engraved saying) 180pt Card Display Case with
Black Steel
Screws. Custom engraving is done to order so please allow 2 days for extra time to engrave.
*** Available in Red, White, Blue, Black, Green, Yellow and Orange.
*** Please leave a note in the notes section at Paypal checkout with your color selections and what you would like the case to say!!!
*** New barrel and screw system so
NO cracking
the acrylic when screwing together.
*** Made from 2 pcs. of Clear acrylic and 1 pc of 3/16" Colored acrylic. CASES WILL NOT HOLD CARDS THICKER THEN 3/16" (180pt or less)
*** Inside cut out measurements are 2-1/2" x 3-1/2"
*** Outside case measurements are 3-1/2" x 4-7/8"
*** Corners are drilled out so your cards DO NOT get damaged !!!
*** All holders are delivered with protective film on cases that will have to be peeled off.
*** You are only bidding on the case NOT the cards pictured.
*** Make sure to tell your local card shops about these listings =}