Permatex ULTRA GREY RTV SILICONE GASKET MAKER MAXIMUM TORQUE Auto Moto Rigid HD

Description

Permatex
ADVANCED FORMULA
ULTRA GREY RTV SILICONE GASKET MAKER
MAXIMUM TORQUE
100% BRAND NEW
Available Size: 3.5 OZ / 99 g
RIGID TORQUE AND HIGH VIBRATION APPLICATIONS • SENSOR SAFE
OEM specified. Permatex Ultra silicones were developed to meet today’s technology changes. Sensor-safe, low odor, noncorrosive. Outstanding oil resistance and joint movement tolerance. Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones. Temperature range -65ºF to 500ºF (-54°C to 260°C) intermittent; resists auto and shop fluids and vibration.
• Designed specially for high-torque and high vibration applications
• Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids
• OEM specified, guaranteed not to leak
• Low odor and non-corrosive formula
• Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings
Permatex Ultra Grey Rigid High-Torque RTV Silicone Gasket Maker
Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements.
Permatex Ultra Grey is sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. This gasket maker is more flexible and more oil resistant.
Temperature Range -65°F to 500°F (-54°C to 260°C)
Application:
Automobile
Valve covers, oil pans, automatic transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings
Heavy Duty
Cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges
DIRECTIONS:
1. For best results, clean and dry all surfaces with a residue-free solvent such as Permatex Brake & Parts Cleaner.
2. Cut nozzle to desired bead size. Gaskets are best formed using a 1/16″ to 1/4″ (2 to 6 mm) bead.
3. Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn.
4. Silicone will skin over in one hour and fully cure in 24 hours under normal conditions. Allow more time for cold or very dry conditions. Clean uncured silicone from hands, tools and clothing.