Permatex Silicone Blue RTV Gasket Maker/Sealer Sensor Safe Squeeze Tube 3 Ounce

Description

You will receive 1 Permatex Sensor-Safe Blue RTV Silicone Gasket Maker 3oz tube, shipped via USPS Service of your choice.
Description
:
Permatex Sensor-Safe Blue RTV Silicone Gasket Maker makes reliable 'formed-in-place' gaskets that resist cracking, shrinking and migrating, effectively replacing almost any cut gasket. With a temperature range of -65 degrees fahrenheit to 500 degrees fahrenheit intermittent, this gasket maker resists auto and shop fluids, and coats pre-cut gaskets to increase reliability without fouling oxygen sensors. Permatex gasket makers offer significant performance advantages which include outstanding oil resistance, excellent torque retention and hi-temp, sensor-safe properties. First generation 1970-1980 gasket maker. Suggested applications include valve covers, oil pans, timing covers, water pumps, thermostat housings, and transmission pans. Permatex always has the right gasket maker for your application.
OEM specified. The original Permatex Blue now with low odor formula. Will not foul oxygen sensors. Replaces almost any cut gasket. Makes reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating. Coats pre-cut gaskets to increase reliability. Temperature range -65°F to 500°F (-54°C to 260°C) intermittent; resists auto and shop fluids.
DIRECTIONS:
For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex
®
Brake and Parts Cleaner.
Cut nozzle to desired bead size – gaskets are best formed using a 1/16″ to 1/4″ (2 to 6 mm) bead.
Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn.
Silicone dries in 1 hour, and fully cures in 24 hours. Allow more time in cold or very dry conditions.
Replace cap after use. Clean hands with Clean tools with non-flammable cleaning fluid.
NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.
Automobile
Suggested Applications: Valve covers, oil pans, timing covers, water pumps, and thermostat housings.
Marine
Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings