Permatex HIGH TEMP RED RTV SILICONE GASKET MAKER Up To 650°F Auto Moto Marine

Description

GASKETING
HIGH TEMP SILICONE GASKET MAKER
RED RTV
100% BRAND NEW
Model: 75152
Available Size: 3 OZ / 85 g
FOR HIGH TEMPERATURE APPLICATIONS • RESISTS UP TO 650°F INTERMITTENT
OEM specified. Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.). Replaces almost any cut gasket by making reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. Temperature range -65ºF to 650ºF (-54°C to 343°C) intermittent; resists auto and shop fluids.
• Formulated for hi-temp applications, or heavy-duty use
• Replaces almost any cut gasket, and coats pre-cut gaskets to increase reliability
• Makes reliable 'formed-in-place' gaskets that resist cracking, shrinking and migrating
• Temperature range of -65F to 650F intermittent
• Suggested Applications: Valve covers, oil pans, timing covers, water pumps, thermostat housings, transmission pans
Permatex High-Temp Red RTV Silicone Gasket Maker is formulated for high-temp applications and heavy-duty use, such as towing. Temperature Range: -65°F to 650°F (-54°C to 343°C) intermittent.
When using a cut gasket, Permatex High Temp Red RTV Silicone can be used to coat the pre-cut gasket to increase reliability. OEM specified.
This single component, RTV gasketing compound cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. Permatex High Temp Red replaces almost any cut gasket by making reliable 'formed-in-place' gaskets that resist cracking, shrinking and migrating caused by thermal cycling.
Application:
Automobile
Valve covers, oil pans, timing covers, water pumps, and thermostat housings.
DIRECTIONS:
1. For best results, clean and dry all surfaces with a residue-free solvent such as Permatex Brake & Parts Cleaner.
2. Cut nozzle to desired bead size. Gaskets are best formed using a 1/16” to 1/4” bead.
3. Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn.
4. Silicone will skin over in one hour and fully cure in 24 hours under normal conditions. Allow more time for cold or very dry conditions.
5. Clean uncured silicone from hands, tools and clothing.