Micro Effects Red LED Light & Control Strobe Flash Blink 9 Volt MEL-PR1-D-9VB

Description

1 pc MEL-PR1 Micro Effects Light - Pure Red LED
DC barrel connector light
1 pc MED1 Micro Effects Dimmer Control
1 pc 9 volt battery clip DC barrel type
The P/N MED1 Micro Effects Dimmer provides dimming, multimode effects, and on / off control of 5 – 24 volt DC LED lights.
The unit features a simple tactile three button interface; Light, Speed, and Mode.
The variety of effects combined with the simplicity of use makes this a great control for low complexity projects.
The Light button
is used in static mode for dimming. Note the Static (0 mode) dimming function is between effects #8 and #1 when sequencing through the modes.
The Speed (On/Off) button
provides ten speed levels for the effects modes and is also used to turn the unit off when it is held longer than 3 seconds.
The Mode button
provides eight dynamic effects, and the Static (0 mode) between effects #8 and #1.
Mode effects patterns
0) Static mode for dimming
1) Up / Down – ramp up on ramp down off – repeat
5) Blinking – long on
2) Up / Down – flame flicker – always on
6) Flash - burst of pulses (emergency vehicle light)
3) Strobe – fast
7) Strobe – slow (beacon light)
4) Blinking – long off
8) Up / Down varying brightness – brief off – repeat
The MED1 body measures a nominal 1.4” length, 0.6” wide and 0.2” thickness.
Each of the connector cables extends from the body 5.5”.
The overall end to end length of the entire body and cable assembly is 13.0” Max.
The unit’s body is sleeved in black and the cables are molded in black PVC.
Well suited for various LED lighting applications such as:
Sign accent lighting
Specialized décor lighting
F/X prop and costume lighting
Stage Lighting
Theatrical effects lighting
POS Point Of Sale displays
MEL Light Specs:
Characteristics
1) DC Barrel Connector female Jack accepts 2.1mm x 5.5mm plug with center positive.
2) Body shell: ABS (black).
3) Volts DC (VDC): 9-12 nominal (continuous), Max 12.5
4) Current (ref.): 20ma @ 9 VDC, 28ma @ 12 VDC, 35ma Max.
5) Power (nominal): 0.18 watts at 9 VDC, 0.34 watts at 12 VDC, 0.44 watts Max.
6) Output: Pure Red (high intensity, 30 degree lens, clear)
7) Color Coordinates CIE1931: x=0.65 / y=0.31
Notes / Cautions
1) Intense light source, for eye safety do not look directly into the beam at close range.
2) This lighting device is static sensitive, retain protective shipping bag for storage to protect from ESD (Electro Static Discharge) damage.
3) Observe correct polarity when connecting power, damage may result from unintended reverse polarity.
4) Device meets Rohs requirements