Lord Fusor 123 Non-Sag Bare Metal Seam Sealer (Fast), 210 ml, Item # FUS123

Description

Lord Fusor 123 Non-Sag Bare Metal Seam Sealer (Fast), Item # FUS123
Fusor 123 sealer is a two-component, urethane-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan and core support seams.
Fusor 123 sealer is used in applications which require a non-sag cosmetic seam sealer with reduced cycle time. Sealer can be applied directly to bare metal or primed surfaces.
Fusor 123 = 7.1 oz (210 mL)
Duplicates factory appearance
Can be used with or without primer
Will not absorb moisture or cause corrosion
Shelf life is 24 months from date of manufacture when stored at 75°F (24°C) in original, unopened container.
Substrates: Bare Metal or primed surfaces
OEM Approvals & Recommendations - Honda/Acura
High Performance – provides excellent adhesion to bare or primed surfaces.
Versatile – bonds bare metal, epoxy or urethane two-component primed surfaces; weld through with minimal burn back.
Excellent Appearance – easily duplicates factory appearance; provides extremely flexible seal with no shrinkage, cracking or sagging.
Environmentally Resistant – provides excellent corrosion protection.
Easy to Finish – can be tooled, wiped clean, sanded and/or painted immediately.
Applications: Duplicates factory look on the following seams: truck beds, tooled door skin, floor pan, core support and any other application in which a non-sag cosmetic seam sealer is required and where fast work time is desired
UPC: 66623390973