-40%
Fluke 805FC Vibration Meter with Fluke Connect
$ 1055.99
- Description
- Size Guide
Description
Untitled DocumentFluke 805FC Vibration Meter with Fluke Connect
Model:
805FC
| Order No:
805FC
A portable multifunction vibration screening tool that provides quantifiable information on the bearing and overall health of motors and other rotating equipment. Features Fluke Connect.
Brand:
Fluke
Model:
805FC
Order No:
805FC
Condition:
NEW
Description
Fluke 805FC Vibration Meter with Fluke Connect
Fluke 805FC Offers
Includes Fluke Connect, which allows you to wirelessly share measurements, create work orders, and report potential problems, all through your smart phone.
Features
Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
Consistent data quality at both low and high frequency ranges
Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
Exportable data via USB
Trending in Microsoft® Excel using built-in templates
Units of measurement: Acceleration: g, m/sec2; Velocity: in/sec, mm/sec; Displacement: mils, mm
Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
Coloured lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
Temperature measurement with Spot IR Sensor increases diagnostic capabilities
On-board memory holds and saves up to 3,500 measurements
Audio output for listening to bearing tones directly
External accelerometer support for hard to reach locations
Flashlight for viewing measurement locations in dark areas
Large screen with high resolution for easy navigation and viewing
Rotating Machinery
The 805 FC enables technicians to confidently track bearing impacting, bearing health, overall vibration level, overall machine health, and bear-ing surface temperature. Its proprietary algorithm known as "Crest Factor Plus" identifies bearing flaws much earlier than simpler vibration meters, and the option to share the results with others in your maintenance team using Fluke Connect® or download the results to an Excel spreadsheet for tracking and trending. It's a tool you can trust, as its built-in database of overall vibration levels was developed from years of analyzing thou-sands of real machines. The 805 FC is designed to be used by any level technician and take readings during route-based maintenance, which can be screened for changes and potential problems over time. Repair-ing machines before they fail increases uptime while reducing energy waste and maintenance costs.
elementExists('Blog/fluke-using-fluke-thermal-imaging-to-troubleshoot-motors-and-drives')){echo $this->element('Blog/fluke-using-fluke-thermal-imaging-to-troubleshoot-motors-and-drives'); }?>
elementExists('/Blog/fluke-facilities-maintenance-challenges-and-the-fluke-solutions')){echo $this->element('/Blog/fluke-facilities-maintenance-challenges-and-the-fluke-solutions'); }?>
Included
What's included with the Fluke 805FC
805FC Vibration Meter
USB cable
Storage case
Belt holster
Quick reference guide
CD-ROM (includes MS Excel template and documentation)
4 x AA batteries
Specifications
Fluke 805FC Specifications
Low Frequency Range (overall measurement)
10 to 1,000 Hz
High Frequency Range (CF+ measurement)
4,000 to 20,000 Hz
Severity Levels
Good, satisfactory, unsatisfactory, unacceptable
Vibration Limit
50g peak (100g peak-peak)
A/D Converter
16-bit
Signal to Noise Ratio
80 dB
Sampling Rate
Low frequency: 20,000 Hz
High frequency: 80,000 Hz
Real Time Clock Backup
Coin battery
Sensor
Sensitivity
100mV g ±10%
Measurement Range
0.01 to 50g
Low Frequency Range (overall measurement)
10 to 1,000 Hz
High Frequency Range
4,000 to 20,000 Hz
Resolution
0.01g
Accuracy
At 100Hz ±5% of measured value
Amplitude Units
Acceleration
g, m/sec
2
Velocity
in/sec, mm/sec
Displacement
mils, mm
IR Temperature Measurements
Range
-20 to 200°C (-4 to 392°F)
Accuracy
±2°C (4°F)
Focal Length
Fixed, at ~3.8 cm (1.5 in)
External Sensor
Frequency Range
10 to 1,000 Hz
Bias Voltage
(to supply power)
20V DC to 22V DC
Bias Current (to supply power)
Maximum 5 mA
Terms & Conditions
Item Condition:
Unless specified otherwise all products listed are Brand New in the original factory packaging and include a full factory warranty.
Shipping:
We currently only ship to U.S. buyers. We ship items within one or two business days from payment. We do not process shipments on weekends and holidays. Local pick up is not available. We only ship to addresses verifiable by either PayPal or credit card issuing bank.
Please note that we cannot alter the address once a purchase is made. In the case of PayPal payment, we will ship orders when the payment is marked “Eligible” for PayPal Seller’s protection.
*Shipping Rates are for Continental US, Please Contact us for other US Destinations
Payment:
Currently all payments must be made directly though PayPal
Sales Tax:
We are required to charge sales tax in North Carolina
Return Policy:
If for any reason you are not 100% satisfied with a product you receive from us, you may return the regular stock product within 30 days from the time of receipt, for a full refund or exchange of the product you purchased (less any shipping costs). Within this time, products may be returned; freight prepaid and must be in their original packaging and in resalable condition.
Shipping errors, missing items or damages must be reported to us immediately (damages should be accompanied by a signed bill of lading acknowledging the damage). Items returned will be inspected for damage or misuse at which time they may be subject to restocking fees, other fees or refused, prior to the issuance of any credit.