DMX LED controller 12 Channels RGB DMX decoder&driver LED strip module DC5V-24V

Description

Store category
Sign Up Now !
You may also like
DMX LED controller 12 Channels RGB DMX decoder&driver LED strip module DC5V-24V
Product Description
Product video please click link :
youtu.be/YMV373HiTJo
( Copy the link to the browser)
Package include
d
:
1x 12CH DMX Decoder
1 x DMX Connect Cable
1 x
User Manual
Welcome to use the12CH constant decoder, which take advantage of advanced microelectronic control technology. This technology changes the international fashion DMX512/1990 standard digital control signals into analog control signals. There are 1 ~ 12 output channels; each channel can achieve 256 control levels. This constant decoder is used when DMX512 control equipment control general LED lighting.
Products Performance:
Input Power:  DC5V-DC24V
Maximum load current:  5A/CH×12
Maximum power load: 300W (5V) 720W (12V) 1440W (24V)
Output gray level: 256
Input Signal:  DMX512/1990
Output signal:  12 channels Constant PWM
Output DMX :  12 channels
DMX512 socket standard RJ45;
Size:  L155*W88*H32
Package Measurement: L173*W700*H50MM
Net Weight:335g
Gross Weight:375g
Basic functions:
There are 12 output channels, can connect with single or RGB lamps
0-100% dimming output, each channel 256 gray levels
International standard DMX512 input protocol, address code set by DIP switches;
Wide voltage DC input DC5V ~ DC24V;
Each occupied by 12 DMX address.
Connection diagram
The signal line connection diagram
1-2 :Empty          3-4:DATA+     5-6:DATA-          7-8:GND
The first DMX address setting:
The decoder set the address bit by coding switch, of which 1-8 is for setting the start address of the Binary numeric code switch of DMX512, the first one is the lowest position, the ninth one is the highest
Bit of address code can be set to 255.
DMX512 start address code is the sum of switches 1-8, at the same time turn downside of the code switch (ON set to "1"), then the value of the bit can be gotten; coding switch up (set to "0"), the value of the bit is 0.
Example 1:
As the following Schematic 1, DMX512 start address is set to 37, encoding the No. 6,3,1 position on switch dial to "1", others set to "0", then the sum of the switch 1-8 code value is 32 + 4 + 1, that is the DMX512 start address 37
Schematic 1
Example 2:
As the schematic 2, DMX512 start address is set to 166, encoding the no. 2,3,6,8 switch dial to "1", others set to "0",, then the sum of the switch 1-8 code value is 2 + 128 + 256 = 388, that is the DMX512 start address 166.
Schematic 2
Note: It will be Automatic operation mode when the No. 10 switch is turned down.
Effect choice (button switch No.1 to No.4):
1, Push No.1: Automat cycling. 2, Push No. 2: Seven-color gradual cycle changing.
3. Push No.1 &2: RGB Fade in and out 4. Push No.3: Severn color jumping
5. Push No.1 & 3: RGB jumping. 6. Push No.2 & 3: Single color fade
7. Push No. 1 & 2 & 3:Single color left scan 8. Push No.4: Single color right scan
9. Push No.1 & 4: Single color left pile up 10: Push No.2 & 4: Single color right pile up
11. Push No.1 & 2 & 3: Single color left and right scan 12. Push No.3 & 4: Single color left and right pile up
13. Push No.1 & 3 & 4: single color red 14. Push No.2 & 3 & single color green
15. Push No.1 & 2 & 3 & 4: single color blue
Speed Choices (Button Switch No.5 to No. 8)
1.Push No.5: 0.5 second. 2. Push No.6: 1 second. 3. Push No.7: 1.5 second. 4. Push No.8: 2 second.
Schematic for System Connection:
Plan one:DMX512 Console+12CH DMX decoder
Plan two:PC DMX512 Console+USD DMX controller+12CH DMX decoder
Installation Notes:
1 This kind of controller works only under DC5V-24V, which is provided by the matched controllable main power, or else the controller will be damaged.
2 The UTP wire is connected hand in hand to make the cable, when two or more controller connected.
3 The power supply should be off when connecting the electric wires, and it can be turned on till making sure the wires are connected correctly and the indicator of main power in red is lighting.
4 Controller should work under the environment of adequately ventilated, dry, not corroded, no flammable gas and rust.
5 Please check the wires connection regularly so that the wires of aged, rust-eaten, and damaged insulation spacer can be replaced timely
Simple troubleshooting and maintenance:
Symptom
Reason Analysis
Solution
NO lighting
1  No power
2  Wrong connection of wire
3  Power protection setting
1  check power supply
2   check wire connection
3   check power failure, power on again
Red indication light is on, green indication light not flash
Didn’t make dip switch or dip switch is not in correct
Follow up the instruction to reset dip switch
The Light color is not show in correctly
1.RGB LED is not connection correctly
2.Dip switch is not in correct place
1    Re-connect the RGB and wire
2    Reset dip switch
Can’t be
synchronization
1 The RJ45 cable is not connected or wrong connection
2 master and slave controller setting failure,The slaver is set dip switch effects
1 re-connect the RJ cable
2 reset master and slave controller to ensure only one master
Led brightness is different at beginning and end
1,   Output line is too long
2,   The diameter of wire is too thin
3,   Overload working
1,   Use annular electric supply or shorten circuit
2,   Calculate electrical current, change strong wire
3,   Change power or increase controller
Payment
Delivery details
Return & Warranty Policy
About us
Contact us
Payment
We only accept PayPal payments from verified accounts with confirmed addresses.
Orders will be shipped after receiving cleared payment. Please kindly confirm.
When you are ready to pay, please reconfirm that your address is correct .
And do Not provide too long recipient's name, thanks. :)
Delivery details
All most of Items would be shipped out
within 1 Day
after received buyers'payment.
Please Kindly note weekends and Holidays are not business day.
FOR FREE SHIPPING:
① I
tem weight is less than 2 KG,
Standard shipping form CHINA to Worldwide(With Tracking Number)
②
Item weight is more than 2 KG,
Expedited Shipping form CHINA to Worldwide
(With Tracking Number)
FOR Buyer-Pay SHIPPING
Expedited Shipping form CHINA to Worldwide
(With Tracking Number)
Please Note:
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. And leave a massage about your request if necessary .
Return & Warranty Policy
We accept order cancellation for any reason within 30 days of receiving your goods. Should you wish to cancel, please notify us by eBay messages in advance.
The return freight need to be paid by buyer when there is no quality problem .
We will issue a refund within 7 days. Please take care of the goods and return it to us in its original condition which is required for a return eligibility; if not, we may refuse to refund.
Warranty Repair :
LED Strip : 1
Years Warranty Repair
Power Supply /
DMX Series
/
Fiber Engine
: 2 Years Warranty
1.If the item is broken in One year within purchase, after verification by the seller,
we will be free replacement of new machine or accessory, all costs borne by the seller.
2.If Second year within purchase, we will be free replacement of new machine or accessory,the buyer send return the product and only bear the return freight.
Please note:
ALL Remote Controllers do NOT contained battery when the item is sent from China. If you need the battery , please contact us about the extra shipping cost.
About us
ALL most of our products have the Certification :
CE , RoHS
We are professional sellers with over 6 years of successful eBay business experience.
Our Factory is Top supplier in China ,provide high quality products and good services at a reasonable price.
Welcome to
customize new items  .
We would highly appreciate the chance to follow up with you if needed.
Contact us
Please contact us by eBay messages.
We will answer all eBay messages during our business hours.
(Monday - Friday 9:00 am to 6:00 pm HKT except all Holidays) .
U
sually within 24 hours of receipt or sooner.
Please do not leave any low detailed seller ratings, neutral or negative feedback before contacting us.
Feedback
On Apr-22-21 at 22:58:07 PDT, seller added the following information: