2PACK ADAPTOR CONVERTER STANDARD SCREW BASE LIGHT BULB SOCKET TO 110V AC PLUG

Description

DiCUNO standard E26 bulb socket adapter, splits your standard socket to 2 polarized outlet and 1 bulb socket.
◆NOTE◆ The 2 outlets are POLARIZED without ground prong. Please be informed and confirm it is what you need before purchase. ★For safe use, please read the detail product description carefully.
[Handy Item] UL listed converter made of plastic. High quality with easy installation. Just turn off the power, screw it into your E26 socket securely and you will have 2 additional outlets.
[Electrical Ratings] Max. current (total of device): 5A; Max. wattage: 660W (E26 socket 100W max. suggested); Voltage range: 0-125V
[Wide Application] A handy adapter to wherever you need an outlet, widely used in garage, workshop and any place with a standard bulb socket.
future-is-tomorrow eBay store
Product Description
DiCUNO Standard E26 Bulb Socket Splitter to 1 E26 Bulb Socket + 2 Polarized Outlets
Handy item to add additional outlets to wherever you have bulb sockets only.
Widely used in garage, workshop, utility room, etc.
Basic Specification
Male Socket Base
Standard E26 Base
Female Socket Base
Standard E26 Base
Outlet Type
Polarized (2-prong) Plug
Maximum Wattage
660W (female socket 100W max. suggested)
Maximum Current
5A (total of device)
Voltage Range
0-125V
Maximum Weight Capacity
1KG (total of device)
Rating of Screwed Bulb
100W Max. Suggested
Heat Resistant Temperature
80°C (White)
Points for Attention
Before Purchase
This socket adapter is to switch into
polarized outlets
without ground prong. Please confirm what you need is a
2-prong
outlet.
This socket adapter
does not have a pull chain
. You can only control it by your switch.
Installation
Please must
cut off power
before installation.
Please screw it
securely
into your socket, and
fully insert
your plug for safe use.
The bulb you screw into the socket part is advised not to exceed
100W
, so that it will not exceed the adapter’s heat resistance and weight capacity.
Please
keep the socket part screwed
for safe use. If you do not need a bulb, we also offer E26-to-single-outlet adapters which can completely change your socket to 3 outlets.
Usage
Please do not exceed the
electrical ratings
for safe use.
This socket adapter is
not waterproof
, therefore we recommend:
Indoor use only.
Keeping it away from wet places like bathroom.
We
do not recommend
using this adapter with dimmers/remote controls/extension cords.
Q1: Will the adapter still be alive when I turn off the bulb?
A:
No. As this socket adapter
does not have a pull chain
to control the bulb separately, when you turn off the switch, the whole adapter will be off.
Q2: Can I screw 2 adapters to get an extension?
A:
Yes. But please keep in mind that the electrical ratings of the combined adapter is still
the same as 1 adapter
.
Type
GU24 to E26 Adapted Socket
E26
E26 - Outlet
E26
E12 to E26 Adapted Socket
Wattage
200W Max.
10W (100W Equivalent)
660W Max.
5W (40W Halogen Equivalent)
200W Max.
Voltage Range
0-250V
120V
0-125V
100-240V
0-250V
Temperature Resistance
160°C
150°C
-
200°C
Color Temperature
-
2700K Warm White
-
3000K Warm White/5000K Daylight White
-
Luminous Flux
-
1100LM High Brightness
-
450LM
-
Package
2PCS; 5PCS; 10PCS; 20PCS
2pcs; 6pcs
2PCS; 6PCS;
2PCS; 6PCS;
6PCS; 10PCS
Kindly note:
If you would like to order more quantity than shown is available, you are welcome to place one order fox maximum available quantity and place one more order again because we always have more, than shows in available items.
Regards