2CH Relay WiFi and Remote Light Switch ,eWeLink APP,433.92MHz,DC12V and AC220V

Description

Notice:
1.If you want to control light with full set , pls buy relay switch and remote transmitter seperately;
2.For full kit,
We will set them to the default mode:toggle (Press button A, 1st relay on,press A again, 1st relay off; press button B,2nd relay on,press B again, 2nd relay off)
If you need other setting , tell us in advance pls;
3.We may not put battery in because of shipping problem(shipping company does not accept battery parcel,so we have to take it out), but you can get the battery easy in your place;
30m remote works with 1pc 27a12v battery, 100m remote works with 1pc 23a12v battery
Spec:
1.AC85-250V input,2 CH,WIFI
2.Working model:Jog-lock(Momentary)/ Self-locking/ Interlock/Manual
3.PCBA Size:83mm*60mm*24mm
4.Cover Size:100MM *62MM *26MM
5.Can be paired with 10pcs remote control at the same time
How to set WiFi mode:
1.Long press thr WiFi pairing button 10s,blue LED flash,waiting for pairing.
2.Download APP :eWeLink
3.Enter the APP,tap "+" in the upper right of the page to enter network connection page ,connect the device step by step,check manual guide for more details
How to set remote mode:
1.How to clean code:
* Long press the 2nd Button on the board 8 seconds,light flash,cleaning code successfully.
2.How to set the working mode:
* Momentary(Self-locking):Press "1st button on the right(remote pairing button)" once,light flash once,then press transmitter button A, momentary mode setting completed;
(Press remote button A, 1st relay on,release off ; Press remote button B, 2nd relay on,release off )
* Toggle (Interlock):Press "1st button on the right" once again,light flash twice,then press transmitter button A,toggle mode setting completed;
(Press remote button A, 1st relay on,press button A again ,1st relay off;Press remote button B, 2nd relay on,press button B again ,2nd relay off )
* Latched (Jog-lock):Press "1st button on the right" once again, light flash triple,then press transmitter button A,latched mode setting completed;
(Press remote button A, 1st relay on,press remote button B, 1st relay off and 2nd relay on )