1pcs Fluke 805 Vibration Meter mechanical troubleshooting and maintenance

Description

Discover Industrial
1pcs Fluke 805 Vibration Meter mechanical troubleshooting and maintenance
Introduction:
Features and Benefits
Innovative sensor design helps minimize measurement variations caused by device angle or contact pressure
Consistent data quality at both low and high frequency ranges
Four-level scale indicates severity of problems for overall vibration and bearing condition
Exportable data via USB
Trending in Microsoft® Excel using built-in templates
Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
Crest Factor+ provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
Temperature measurement with Infrared Temperature Sensor increases diagnostic capabilities
On-board memory holds up to 3,500 measurements
Audio output for listening to bearing tones directly
External accelerometer support for hard to reach locations
Flashlight for viewing measurement locations in dark areas
Large screen with high resolution for easy navigation and viewing
Use the 805 to check the following machine categories:
Chillers (refrigeration)
Fans
Cooling tower drives
Centrifugal pumps
Positive displacement pumps
Air compressors
Blowers
Generic gearboxes (rolling element bearings)
Machine tools (motor, gearboxes, spindles, etc.)
Vibration Meter
Low Frequency Range (Overall Measurement)
10 Hz to 1,000 Hz
High Frequency Range (CF+ Measurement)
4,000 Hz to 20,000 Hz
Severity Levels
Good, satisfactory, unsatisfactory, unacceptable
Vibration Limit
50 g peak (100 g peak-peak)
A/D Converter
16-bit
Signal To Noise Ratio
80 dB
Sampling Rate
Low frequency
20,000 Hz
High frequency
80,000 Hz
Real Time Clock Backup
Coin battery
Sensor
Sensitivity
100 mV g ± 10%
Measurement Range
0.01 g to 50 g
Low Frequency Range (Overall Measurement)
10 Hz to 1,000 Hz
High Frequency Range
4,000 Hz to 20,000 Hz
Resolution
0.01 g
Accuracy
At 100 Hz ± 5% of measured value
Amplitude Units
Acceleration
g, m/sec²
Velocity
in/sec, mm/sec
Displacement
mils, mm
Infrared Thermometer (Temperature Measurement)
Range
-20 °C to 200 °C (-4 °F to 392 °F)
Accuracy
±2 °C (4 °F)
Focal Length
Fixed, at ~3.8 cm (1.5")
External Sensor
Note: Fluke supports but does not provide external sensors
Frequency Range
10 Hz to 1,000 Hz
Bias Voltage (To Supply Power)
20 V dc to 22 V dc
Bias current (To Supply Power)
Notice: According to international shipping requirements, it is forbidden to have powder, liquid, nor battery in package,In order to avoid delay of transportation, we will have to check and take out these items before packing.
Payment:
Payment must be made within 12 days after the auction/bid ends, or eBay will open Unpaid Item case automatically later.
Feedback:
We strive for positive Feedback on all transactions and nothing less than an overall Detail Seller Rating (DSR) of 5 STAR.If you are considering giving a neutral or negative Feedback or a low DSR. Do write to us and give us an opportunity to address your concerns firstly.We will leave the positive feedback when we got your positive feedback.
Delivery details:
We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address.
Items are generally shipped within 10 business day after your payment has been cleared (Sat. & Sun. excluded.)
RETURN POLICY:
We offer 14 days return policy from the day you received your item under the following conditions All returns must be in the original non-damaged condition, including packaging, documentation, warranty cards, manuals and accessories or else it will not be accepted.
Original shipping & handling charges are not refundable.
Customer is responsible for shipping, shipping cost and proof of delivery on all returns. Please be sure that you return shipments are properly packed and fully insured. We are not responsible for returned packages if lost by shipper/carrier or got damaged buy carrier.
Shipping cost (to and from buyer) will be charged for any refused shipping delivery (include duties, taxes and customs fee if any).
TAX&VAT
Please read this before buying International Shipping may Be Delayed Due to Customs. Customers are Responsible For All Import Charges, Tariffs, Duties, Taxes, and Fees Associated with Import of the product. Shipping Charges does not include any Import Charges, Tariffs, Duties, Taxes, and Fees Associated with it.
Contact us:
Please contact us with any comments, questions or suggestions that you may have bysending ebay message, All the mail will be replied within 24 hours. Please ensure your mail box would not blocked / filtered our mails.we will be happy to assist you. please feel free to contact us for WHOLESALES deal,we will surely give you a satisfatory price. We would try our best to serve you with any question / problem. Please contact us first before leaving Negative / Neutral Feedback or open any cases.
Copyright 2018 Discover Industrial. All rights reserved.