1PC mechanical troubleshooting and maintenance F805 Fluke 805 Vibration Meter

Description

Complicit Components
1PC mechanical troubleshooting and maintenance F805 Fluke 805 Vibration Meter
Introduction:
Features and Benefits
Innovative sensor design helps minimize measurement variations caused by device angle or contact pressure
Consistent data quality at both low and high frequency ranges
Four-level scale indicates severity of problems for overall vibration and bearing condition
Exportable data via USB
Trending in Microsoft® Excel using built-in templates
Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
Crest Factor+ provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
Temperature measurement with Infrared Temperature Sensor increases diagnostic capabilities
On-board memory holds up to 3,500 measurements
Audio output for listening to bearing tones directly
External accelerometer support for hard to reach locations
Flashlight for viewing measurement locations in dark areas
Large screen with high resolution for easy navigation and viewing
Use the 805 to check the following machine categories:
Chillers (refrigeration)
Fans
Cooling tower drives
Centrifugal pumps
Positive displacement pumps
Air compressors
Blowers
Generic gearboxes (rolling element bearings)
Machine tools (motor, gearboxes, spindles, etc.)
Vibration Meter
Low Frequency Range (Overall Measurement)
10 Hz to 1,000 Hz
High Frequency Range (CF+ Measurement)
4,000 Hz to 20,000 Hz
Severity Levels
Good, satisfactory, unsatisfactory, unacceptable
Vibration Limit
50 g peak (100 g peak-peak)
A/D Converter
16-bit
Signal To Noise Ratio
80 dB
Sampling Rate
Low frequency
20,000 Hz
High frequency
80,000 Hz
Real Time Clock Backup
Coin battery
Sensor
Sensitivity
100 mV g ± 10%
Measurement Range
0.01 g to 50 g
Low Frequency Range (Overall Measurement)
10 Hz to 1,000 Hz
High Frequency Range
4,000 Hz to 20,000 Hz
Resolution
0.01 g
Accuracy
At 100 Hz ± 5% of measured value
Amplitude Units
Acceleration
g, m/sec²
Velocity
in/sec, mm/sec
Displacement
mils, mm
Infrared Thermometer (Temperature Measurement)
Range
-20 °C to 200 °C (-4 °F to 392 °F)
Accuracy
±2 °C (4 °F)
Focal Length
Fixed, at ~3.8 cm (1.5")
External Sensor
Note: Fluke supports but does not provide external sensors
Frequency Range
10 Hz to 1,000 Hz
Bias Voltage (To Supply Power)
20 V dc to 22 V dc
Bias current (To Supply Power)
Notice: According to international shipping requirements, it is forbidden to have powder, liquid, nor battery in package,In order to avoid delay of transportation, we will have to check and take out these items before packing.
Delivery details:
1. We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address.
2. Items are generally shipped out the 1-5 business day after your payment has been cleared (Sat. Sun. excluded.)
3. Orders from the United States will all be shipped out via epacket. The shipment usually takes 10-14 days, if you need the item urgently, please contact us for detail before purchase.
4. Customers from other country, if your order passed 30 USD , your package with be shipped with tracking service for free ,if less than 30 USD, your order will be shipped without tracking number by China Post. The shipment usually takes 20-30 days.if you need the item urgently, please contact us for detail before purchase.
Terms of sales :
1. We offer 60 days money back guarantee return policy.
2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part.
3. For all returned products, buyers please contact us for the returning address.
4. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item.
payment :
1. All payments must be prepaid.
2. We only accept payment via Paypal. Please kindly check if you can do the payment via PayPal before placing an order.
Feedback:
If you are dissatisfied for any reason, please donot be quick to leave negative/neutral feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED
TAX &DUTY &VAT :
The transaction does not include any Import Tax / Duty / VAT / Brokerage Fees / Handling Fees. For more information about the tax rate, please check with local custom department before purchases. If you reject the package due to any charged tax or duty, we reserve the right to charge ALL shipping cost and 5% (of total price) handling fee. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. We do not responsible for any custom duty or import tax. Please check with your country's customs office to determine what these additional costs will be prior to bidding / buying. Sometime customs will inspect the parcel and sometime will not. If you have any special request, please kindly advise us once place order.
Contact us:
Please contact us with any comments, questions or suggestions that you may have bysending ebay message, All the mail will be replied within 24 hours. Please ensure your mail box would not blocked / filtered our mails.we will be happy to assist you. please feel free to contact us for WHOLESALES deal,we will surely give you a satisfatory price. We would try our best to serve you with any question / problem. Please contact us first before leaving Negative / Neutral Feedback or open any cases. We work 6 Days a week From 9:00am - 6:00pm Monday - Saturday CHINA Time.
Best
Customer Service
Prompt
Delivery
100% Money Back
Guarantee
Easy & Secure
Payments
Copyright 2018 Complicit Components. All rights reserved.
On Aug-21-20 at 03:59:15 PDT, seller added the following information: